Orange Workshop - Rotofury Elite Dart Barrel Adapter

Added 1/29/2016

You will need a 3D printer and some basic hand tools to finish and fit these parts. Download the 3D printer files here.

This is a barrel adapter that will allow you to convert the Rotofury to shoot Elite Streamline Darts. This adapter is designed to use 17/32 inch brass tubing for the inner barrels and all of the holes are slightly enlarged to compensate for any shrinkage that may occur as the material cools. The examples shown here are made from black PLA filament, though any filament of sufficient rigidity may be used.

To finish this mod you will need:

  • 17/32 inch brass tubing cut into 10 equal lengths with the ends sanded smooth (measure off of the 3D printed adapter)
  • Hot glue
  • Sandpaper
  • File
  • A well-calibrated 3D printer


Our goal is to help the modding community by releasing DIY 3D printer files for anyone who wants to use or modify them. We'll continue adding to the library as we work on new projects. We hope these are helpful!