COVL-SPG2 Core Overload: Longshot 20 Kg - This spring has a power output of over 20 kilograms.

This is a SLA printed pusher breech for a pusher-style Longshot build and is designed to form a nearly perfect seal with 17/32-inch barrel material.

This kit includes Longshot Bolt Sled, Longshot Plunger Rod, Longshot Plunger Head, Plunger Screw, Metal Trigger, Trigger Spring, Plunger O-ring and PTFE White Lithium Grease

COVL-SPG2 Core Overload: Longshot 14 Kg - This spring has a power output of over 14 kilograms.

This is a SLA printed chamber for a pusher-style Longshot build and is designed to accept 17/32-inch brass or an Orange Mod Works Workshop 17/32-inch aluminum barrel.

With this 10kg spring, the Longshot can achieve 80-100 fps and shoot up to 70-75 feet flat.

Core Standard Series VI 8KG - With this 8kg spring, the Longshot can achieve 80-100 fps and shoot up to 70-75 feet flat.

Orange Workshop Longshot Metal Plunger Tube - The highest-performing plunger tube that fits in the stock Longshot body. It is made of rolled aluminum tubing and has perfectly straight sidewalls for maximum performance. Custom-built with the largest inner diameter possible for increased air volume.

This is a SLA printed plunger head designed to be used with the OMW Workshop aluminum Longshot plunger body.

Orange Workshop
Custom Aluminum Barrel - With the performance of 9/16-inch brass as well as the light weight and low cost of aluminum, we bring you the Orange Workshop custom barrel.

Orange Workshop
Custom Aluminum Barrel - With the performance of 17/32-inch brass as well as the light weight and low cost of aluminum, we bring you the Orange Workshop custom barrel.

This is a SLA printed spring rest that captures the Longshot’s spring on the plunger assembly.

This is our standard performance o-ring for the Longshot and is the same o-ring that ships with the stage 2 kit. It will fit on both stock sized plunger heads and the expanded plunger head designed for the aluminum plunger tube.

This is a trigger catch spring for the Longshot blaster that is roughly twice as strong as the stock catch spring. It's designed to help with priming reliability when using heavier mainsprings.

This trigger spring was originally designed to push our heavier metal triggers, but can be used with any Longshot trigger. It gives you a slightly heavier trigger pull which can be a good thing if you are running a heavily modded Longshot without a trigger guard.