|
|
|
|
|
|
|
|
|
|
|
|
|
|
This trigger spring was originally designed to push our heavier metal triggers, but can be used with any Longshot trigger. It gives you a slightly heavier trigger pull which can be a good thing if you are running a heavily modded Longshot without a trigger guard.
|
This is our standard performance o-ring for the Longshot and is the same o-ring that ships with the stage 2 kit. It will fit on both stock sized plunger heads and the expanded plunger head designed for the aluminum plunger tube.
|
This is a set of 5 replacement plunger head screws for the Longshot blaster. They're compatible with both stock and OMW stage 2 plunger assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Orange Workshop
Custom Aluminum Barrel - With the performance of 17/32-inch brass as well as the light weight and low cost of aluminum, we bring you the Orange Workshop custom barrel.
|
Orange Workshop
Custom Aluminum Barrel - With the performance of 9/16-inch brass as well as the light weight and low cost of aluminum, we bring you the Orange Workshop custom barrel.
|
Orange Workshop Longshot Metal Plunger Tube - The highest-performing plunger tube that fits in the stock Longshot body. It is made of rolled aluminum tubing and has perfectly straight sidewalls for maximum performance. Custom-built with the largest inner diameter possible for increased air volume.
|
|
|
Singapore Store